Instructions:

1. Make dough: Mix white glue, cornstarch and flour together. Knead dough well. Press dough into a flat disk. Place on a sheet of wax paper. Cover with another sheet of wax paper. Roll dough about 3/16” thick. Remove top sheet of wax paper.
2. Using letter-shaped clay cutters, cut designs from clay. Allow clay tile to dry. Remove wax paper backing. Place clay tile back side up. Allow back to dry a little while longer.
3. Stick masking tape on tile back, behind cut-out. Lay tile flat, right side up. Squeeze transparent 3D paint into cut out areas. Allow paint to dry.
4. Optional: Tile can be painted with tempera or acrylic paint, glitter glue or left unpainted. Place finished tile in a window or rest against an open CD case.

Sponsored By:

www.elmers.com