Cell Phone Case
Designed by Sandy Laipply

1107-4

When you see the “helping hand” symbol on a project, it means you may need adult supervision to do the project. Always cover your work surface with a mat or some type of protective covering like wax paper or plastic. Always use care when using tools or a heat source. Be careful and safe!

Main supplies:

9” x 12” rectangle of felt – main color- we used light blue
Scrap of second color felt – we used yellow
Needle and thread
Button thread
2 buttons ( we used red)
2 squares hook and loop tape
Pins
Quarter

Basic Supplies:

Scissors
Ruler or measuring tape
Pencil

This project features notes or instructions in Adobe Reader format. If you
do not have Adobe Reader, download it for free here.

Click here to download Cell Phone Pattern A (PDF)
Click here to download Cell Phone Pattern B (PDF)

Instructions:

Use pattern provided or measure and cut pieces to the size of your phone. Cut felt pieces. Use button thread and sew one half of hook and loop tape 2” down from top of center front.
Pin the front to 2 layers of side pieces. Using thread, sew front piece to side pieces with a small running stitch, and a 1/4” seam. Repeat with the back piece.
Fold the top flap down and sew other half of hook and loop tape as desired. Draw around a quarter on the second color of felt. Cut the circle out. Use 3 strands of contrasting thread and a blanket stitch to sew the circle to the front flap, hiding the stitches from the hook and loop tape.
Fold the handle piece in half lengthwise. Pin together. Use 3 strands of contrasting thread to sew a blanket stitch along both sides of the handle. Sew the handle inside one top edge. Sew the hook and loop tape to attach the other end.
Sew buttons on both sides as shown. If desired, cut small opening for antennae.

Coats and Clark
www.coatsandclark.com

Cell Phone Case Designed by Sandy Laipply

Cell Phone Case
Designed by Sandy Laipply